Transcend-information III Manuale Utente Scaricare il pdf (Pagina 43)

4-12 CHAPTER 4: LOADING NETWORK DRIVERS

Finding the Adapter’s Port Address for Multiple

Adapters

To ﬁnd the appropriate adapter’s port address when installing

more than one adapter in a NetWare server, follow these steps.

You must use the adapter’s port address when installing one

or more adapters in a server. You must use the adapter’s slot

number when installing one or more adapters in a client.

1 Access the main menu on the EtherDisk diskette.

a Boot the computer under DOS.

b Insert the EtherDisk diskette in a ﬂoppy drive and make

that drive the active one.

c At the prompt, type:

INSTALL [Enter]

The main menu appears.

2 Select Conﬁguration/Diagnostic/Troubleshooting, and

press [Enter].

3 In the next screen, select Conﬁguration and Diagnostic

Program, and press [Enter].

If multiple adapters have been installed, the screen that

appears will list them.

4 Select the adapter whose port address you want.

5 Select View in the menu bar, and press [Enter].

The screen that appears contains the desired I/O port

address. Make a note of the address.

6 Repeat steps 3 and 4 for each adapter.

7 Exit the program.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Nessun commento

Transcend-information III Manuale Utente Pagina 43